A stain on the ceiling directly under the shower
With clear direction, escaped pan water follows the joist bay and drops at the first low point it finds, which is rarely under the drain itself.
Source of the water
Sharpes, FL
Our guided-recovery team cleans up shower leaks and overflows, including moisture behind tile, beneath flooring, and inside nearby wall cavities.
Signs to look for
With clear direction, if you notice any of these problems, call us before water has more time to spread into nearby materials.
With clear direction, escaped pan water follows the joist bay and drops at the first low point it finds, which is rarely under the drain itself.
With clear direction, water that gets past the pan runs to the edge of the mortar bed and into the subfloor at the threshold.
With clear direction, run a knuckle across the shower floor and listen for the tone to change from solid to empty.
For a smoother recovery, corners and the curb move slightly with the building, so rigid grout there cracks and reopens.
From cleanup toward a fresh start, a shower curb is waterproofed over the top and down both faces, and its two ends are where that wrap is hardest to finish.
For a smoother recovery, a shower curb is built to shed water back inward, and a door sweep or threshold seal keeps the rest in.
What happens
Our guided-recovery team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
As the property gets back on track, before we look at the pan we rule out the toilet, the sink and the supply lines feeding the shower.
As the property gets back on track, the drain is plugged and the pan is filled to just below the curb, then watched over a set period.
For a smoother recovery, if the pan holds, water is directed at the curb, the corners, the door sweep and the valve trim in turn.
From cleanup toward a fresh start, a traditional pan drains twice: once through the visible drain and once through weep holes at the base of the drain body.
From cleanup toward a fresh start, a moisture meter reads the framing, subfloor, wall base and the ceiling underneath, and a thermal imaging camera shows the shape of the wet area.
With clear direction, we tap the shower floor and the lower walls and mark what has debonded. For a smoother recovery, hollow sounding areas usually come off in the repair anyway.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
As the property gets back on track, here is how we usually handle shower leak cleanup near Sharpes, FL.
As the property gets back on track, on the call we ask one question first: does the water appear during a shower, or with nothing running.
Your callAs the property gets back on track, stop using it and use another bathroom if you have one.
+5 minutesAs the property gets back on track, if a ceiling is stained or bulging underneath, keep people out from under it and leave the area lit from a doorway.
+10 minutesFrom cleanup toward a fresh start, a crew arrives, meters the wet area and sets up a flood test on the pan.
On arrivalAs the property gets back on track, we show you where access is needed and why, and we choose the least visible wall wherever the drying allows it.
First hours on siteFor a smoother recovery, air movers deliver air into the wall cavity and under the flooring rather than across the room.
Day 1From cleanup toward a fresh start, the three places that stay wet longest are the subfloor at the shower threshold, the framing behind the surround, and the ceiling below.
Day 2 to 4Understanding the cost
With clear direction, we explain the recommended work and price before you approve the job. With clear direction, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Shower leak caught early, drying the floor and wall base only | From cleanup toward a fresh start, national estimate for diagnosis, testing, drying equipment and monitoring where nothing needs removal. | $500 to $1,500 |
| Wet wall cavity drying behind a tub or shower, one bathroom | With clear direction, national estimate for controlled openings, cavity drying and daily readings behind the surround. | $450 to $1,200 |
| Shower leak that reached the subfloor and the ceiling below | For a smoother recovery, national estimate covering both rooms, including ceiling material removal, drying and cleaning. | $2,500 to $8,000 |
| Drying priced by affected area, clean water | With clear direction, national estimate used when the wet area is measured rather than priced as a room. | $3 to $7 per square foot |
| Tile and mortar bed removal, per square foot | With clear direction, national estimate for removal and disposal of tile with a mortar setting bed. | $3.00 to $8.00 |
| Shower pan flood test performed on its own | With clear direction, national estimate when the test is the only service requested. With clear direction, it is normally folded into a full diagnosis visit. | $150 to $400 |
| Shower pan or membrane rebuild by a tile contractor | National estimate for the rebuild trade, not our recovery guide. Included so you can see the whole picture. | $1,000 to $4,000 |
How long the shower has been leaking
A few weeks means wet framing and a drying recovery guide. A few years means a saturated mortar bed, a spongy subfloor and probably a rebuild.
Whether the tile and mortar bed have to come off
From cleanup toward a fresh start, drying can often be done through a small opening in an adjacent wall or from the ceiling below.
Which component actually failed
As the property gets back on track, a door sweep or a caulk joint is a cheap fix once it is proven.
Access to the space under the bathroom
From cleanup toward a fresh start, a basement or crawl space under the shower lets us dry the subfloor and joist bay from below, which is faster and cheaper.
How much of the room below is involved
A single stain is a small recovery guide. A ceiling that took water across two joist bays brings insulation, light fixtures and paint into the job.
Equipment days in a small closed space
From cleanup toward a fresh start, bathrooms dry well because they are small, but tile and mortar release moisture slowly.
Why timing matters
As the property gets back on track, water can keep moving into nearby materials even when the surface looks dry.
With clear direction, unlike a burst pipe, this leak is switched on by the household.
With clear direction, plywood that goes through repeated wet and dry cycles delaminates in layers.
With clear direction, a mortar bed sitting on a failed liner acts like a sponge that never gets to dry.
As the property gets back on track, a wall cavity behind a shower is warm, dark and repeatedly rewetted, which is a favorable set of conditions.
Helpful service information
For a smoother recovery, start with the short explanation. As the property gets back on track, open a card if you want a little more detail.
From cleanup toward a fresh start, at the bottom sits the preslope, a sloped bed that sends water toward the drain.
From cleanup toward a fresh start, a tile shower is a stack of layers, and knowing the stack explains every failure.
As the property gets back on track, grout and tile are the wear surface, not the seal, and water passes through both slowly by design.
As the property gets back on track, the grout myth costs homeowners more money than any other idea in bathroom repair.
For a smoother recovery, mortar and tile hold moisture and release it gradually, so the room air can read normal while the setting bed is still saturated.
With clear direction, drying a shower leak is different from drying a burst pipe, because the wet material is enclosed and slow.
Help near you
Choose your area below, or call (866) 736-0707 and describe what happened.
Common questions
For a smoother recovery, timing is the first clue. From cleanup toward a fresh start, if water appears during or shortly after a shower and nothing shows with the water off, the assembly is leaking rather than a pipe.
For a smoother recovery, no, and this is the most common misunderstanding in shower repair. As the property gets back on track, grout is a filler between tiles and it is porous by design.
With clear direction, sometimes the leak is at the curb, the door sweep, the valve trim or a corner joint, and those are repaired without touching the floor.
As the property gets back on track, the drain is plugged, the pan is filled with water to just below the curb, and the level is marked and watched over a set period.
For a smoother recovery, a traditional shower drain has small openings at its base that let water sitting on the pan liner escape into the drain.
From cleanup toward a fresh start, check whether it darkens after a shower and fades between them, which points at the shower rather than a pipe.
From cleanup toward a fresh start, three to five days is typical once the source is stopped and the equipment is in.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Our guided-recovery team guide you through homes, businesses, and managed properties throughout Sharpes, FL and nearby communities.
View the area on Google Maps